Overview The main components of the bucket elevator are Z-shaped, C-shaped, mixed, and horizontal. They have the same working principle and characteristics. They are all used for horizontal-vertical-horizontal conveying of powder, granular and small blocks. materials. Its compact structure and small footprint...
Bucket elevators are mainly composed of Z-shaped, C-shaped, mixed, and horizontal. They have the same working principle and characteristics. They are all used for horizontal-vertical-horizontal conveying of powder, granular and small block materials. . Its compact structure, small footprint, large lifting height, good sealing performance, and no damage to materials. The machine has a large load and is easy to maintain.
The single bucket elevator is composed of the following structures: drive device, coupling, bearing device at both ends, support, machine cover, inlet and outlet, etc.
The transmission system of the single bucket elevator is based on the electric motor as the driving force, which is decelerated by the gear reducer, and then the power is transmitted to the screw shaft through the chain transmission.
Bucket elevator is suitable for lifting from low to high. The supplied materials are put into the hopper through the vibrating table and then the machine automatically moves upwards continuously. The conveying speed can be adjusted according to the conveying volume, and the lifting height can be selected as needed. The hopper is designed and manufactured by yourself. The PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs, and are supporting vertical packaging The design of the computer measuring machine is suitable for the lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products. The automatic stop and start of the machine can be controlled by the signal recognition of the packaging machine.
Bucket elevator is a series of hoppers that are evenly fixed on the endless traction components to vertically lift materials. Divided into three kinds of chain, plate chain and belt.
Principle of operation: The hopper scoops up the material from the storage below. As the conveyor belt or chain is raised to the top, it turns over after bypassing the top wheel, and the bucket elevator dumps the material into the receiving tank. The transmission belt of the belt-driven bucket elevator is generally rubber belt, which is installed on the lower or upper transmission roller and the upper and lower reversing rollers. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the upper or lower side, and a pair of reversing sprockets on the lower or upper side. Bucket elevators are generally equipped with organic shells to avoid flying dust in the bucket elevators.
Bucket elevator: suitable for lifting from low to high, the supplied materials are put into the hopper through the vibrating table, and the machine automatically moves upwards in succession.