Banner

Vertical exhaust machine

Home>company's product > new energy

Vertical exhaust machine

1. Brief description and characteristics: The mixing transition bin contains two internal and external agitators (to prevent material bridging), filling screw + vacuum exhaust pipe mechanism (the screw pushes and extrudes the material, and the vacuum exhaust pipe Responsible for pushing the screw into the extrusion process...

Vertical exhaust machine

1,Bowling machineBrief description and features:

The mixing transition bin contains two internal and external agitators (to prevent materials from bridging)

Filling screw + vacuum exhaust pipe mechanism (the screw pushes and extrudes the material, the vacuum exhaust pipe is responsible for vacuuming and exhausting the material during the extrusion process by the screw)

Positioning mechanism + jacking and compacting mechanism (positioning mechanism is responsible for accurately positioning the position of the box body, and the jacking and compacting mechanism is responsible for flattening and compacting the exhausted air)

Weighing system (accurately control the filling amount of the material) box body sealing (responsible for sealing the sagger cornice after the sagger is positioned to prevent the material from getting out of the sagger cornice during the filling process)

Cut-off mechanism (this mechanism is similar to the function of the valve port, mainly responsible for the material falling on the line body after the sagger is removed)

Vacuum exhaust recovery system (The main function is to recycle 99.9% of the filter screen during the vacuum exhaust process to the mixing transition chamber to prevent unnecessary waste)

Dust removal mechanism (the dust removal mechanism of this equipment has an interface for docking with the dust removal equipment, as long as it is connected to the dust removal equipment, note: the dust removal equipment needs to be purchased separately and is not included in this equipment!)

Saggar conveying system (ceramic wheel{{1}}304 stainless steel shaft+non-metallic guide wheel and other structures to prevent unnecessary metal powder due to contact or friction)

Contact with the material belongs to static friction, such as: the inner wall of the silo is sprayed with Teflon treatment, and the contact with the material belongs to dynamic friction, such as: agitator, screw, etc., sprayed with tungsten carbide treatment

2. Technical parameters of the pot filling machine:

Measurement method: weighing type

Feeding method: screw feeding

Filling weight: 1-10Kg

Filling accuracy: ≤ soil 20g

Filling speed: 1-2 bowls/min

Suitable container: square sagger

Power supply: three-phase 380V/220V 50-60Hz

Machine power: 5KW

Air pressure: 0.4-0.8Mpa

Air consumption: 1m3/h

Machine weight: 360Kg

Overall size: 1016mm front *1675mm side *3545mm height