Banner

Vertical bowl filling machine

Home>company's product > new energy

Vertical bowl filling machine

1. Simple elucidation and features: the mixing transition bin includes two internal and external agitators (to avoid material bridging), filling screw + cutting and turning door organization (the screw pushes and kneads the material, and the material is directly filled into the box Inside the bowl, the door closes after the filling is completed...

Vertical bowl filling machine

1,Automatic bowl filling machineSimple explanation and features:

The mixing transition bin includes two internal and external agitators (to avoid material bridging)

Filling screw + shutting and turning door organization (the screw pushes and kneads the material, directly filling the material into the sagger, and the turning door is closed after the filling is completed)

Weighing organization (controlling the filling volume of materials), the organization's transportation belts are multi-stage fixed-point planning, and the cooperative filling organization can perform segmented filling, which can reduce the stacking height of materials.

Material cutting organization (this organization is similar to the function of the valve port, mainly used for the material falling on the line body after the sagger is gone)

Dust removal organization (the dust removal organization of this equipment has an interface for docking with the dust removal equipment, as long as it is connected to the dust removal equipment, note: the dust removal equipment must be purchased separately and not included in this equipment!) The double layer dust removal organization has a very good effect on the dust treatment. , The bottom plan has a centralized collection organization, which is very convenient and convenient to collect residual materials.

Automatic bowl loading machine and sagger transportation system (ceramic wheel {{1}}304 stainless steel shaft+non-metallic guide wheel and other structures to avoid unnecessary metal powder due to touch or friction)

Contact with materials is attributed to static friction, such as: the inner wall of the silo is sprayed with Teflon

Contact with materials is attributed to dynamic friction, such as: agitator, screw, etc. are sprayed with tungsten carbide treatment

2. Technical parameters of automatic pot filling machine:

Measurement method: gross weight type

Feeding method: screw feeding

Filling amount: 1-10Kg

Filling accuracy: ≤±20g

Filling speed: 2 bowls/min

Suitable container: square sagger

Power supply: three-phase 380V/220V 50-60Hz

Machine power: 3.4KW (excluding dust removal equipment)

Air pressure: 0.4-0.8Mpa

Air consumption: 1m³/h